Celect CC852KIT Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Termostat Celect CC852KIT. Celect CC852KIT 10 halaman. Rf programmable thermostat

I. RF Address Matching

Set the RF address in WT852T(Transmitter) by

accessing internal setting.

for "1" and

Press

For example, If you are going to set 11110011,

Press

4 times, then

You will get

It means the RF address equal to 11110011.

To match the address for the receiver, set the dip

switch as following. Switch in upper position means "1"

and lower position means "0"

Now both transmitter and receiver having the same

Address "11110011" and hence they will communicate.

for "0" for the digit .

2 times and

2 times.

in the display.

11110011

2. Mounting:

Mounting (Transmitter):

- Pull out the battery drawer

- Use a screwdriver to press

on the spot to detach the

front shell

- Insert 2 pcs of wall anchors

into the holes of the wall.

- Fasten the thermostat with

2 pcs of screws through the

mounting holes.

- Assemble the front shell to

the base.

- Insert the battery drawer

back to the position.