7th Sense Juggler Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer 7th Sense Juggler. 7th Sense Juggler 2 halaman. Pixel
Halaman Cetak
Specification
Environmental Characteristics
Temperature
Humidity (non-condensing)
Altitude
Specification
Rating/Description
Rackmount Dims (H × W × D)
(1U) 44 × 424 × 500 mm
Rackmount weight (approx.)
7.2 kg
Power Supply
100-240 VAC 50-60 Hz
Power
100 W
Current (max.)
1.5/0.9 A
Cooling
Forced air
BTU Rate
341
End of Service Life
Dispose of the equipment and any components in accordance with all local and national
safety and environmental requirements.
Regulatory Compliance Statements
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
European Union
This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
7thSense Design : 2 The Courtyard, Shoreham Road, Upper Beeding, BN44 3TN, UK
www.7thsense.one
Copyright © 7thSense Design Ltd : M532-5
When operating
When non-operating
(powered)
(not powered)
+15 to +30
°
C
-10 to +50 °C
10 to 90%
5 to 95%
≤ 2000 m
≤ 10000 m
Notes
Width incl. mounting ears: 483 mm
Autoranging, IEC 60320 inlet
Inlets at front, exhaust at side & rear
October 2020
Juggler Pixel Processor
User Guide
Safety and Handling
Customer Support Portal : http://portal.7thsense.one
Support
For any support issues with Juggler Pixel Processor units, please contact 7thSense directly.
Visit our customer support portal where you can find a wide range of support documentation and
video tutorials, together with contact information.
Warranty
Standard warranty is one year, return-to-supplier. Please contact 7thSense if you require an
extended warranty.
Please ask for instructions and request authorisation before returning a unit for repair.
Operating Instructions
Operating instructions for your Juggler can be found in the Online User Guides section of the
customer support portal.
Handling and Installation
Unpacking
Unpack your Juggler carefully onto a clean and level surface and examine it for any signs of transit
damage. Contact 7thSense immediately if anything appears to be damaged, or any parts missing.
Please retain all packaging in case of future need to return a Juggler.
Lifting
The weight of the Juggler unit is stated below and on the product label. Observe your internal
manual handling recommendations to avoid injury, especially when manoeuvring into a rack.
Rack mounting
Juggler units must be installed in a rack with load-bearing support along the sides, or on a shelf.
The front panel should be secured using an M6 rack mount bolt in each of the top and bottom
mounting holes on each side of the unit's front panel. These ears alone will not support the weight
of the unit.
Mount Jugglers with a minimum one-third rack-unit spacing.
Rack stability warnings:
Ensure the rack is stable (e.g. bolted to the floor) before sliding out the Juggler unit.
•
Do not place objects on equipment projecting from a rack (e.g. do not use as a shelf).
•
Only slide out one piece of equipment from the rack at a time.
•