7th Sense Juggler User Manual

Browse online or download pdf User Manual for Computer Hardware 7th Sense Juggler. 7th Sense Juggler 2 pages. Pixel

Print Page

Specification

Environmental Characteristics

Temperature

Humidity (non-condensing)

Altitude

Specification

Rating/Description

Rackmount Dims (H × W × D)

(1U) 44 × 424 × 500 mm

Rackmount weight (approx.)

7.2 kg

Power Supply

100-240 VAC 50-60 Hz

Power

100 W

Current (max.)

1.5/0.9 A

Cooling

Forced air

BTU Rate

341

End of Service Life

Dispose of the equipment and any components in accordance with all local and national

safety and environmental requirements.

Regulatory Compliance Statements

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with this user guide, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

European Union

This is a Class A product. In a domestic environment, this product may cause radio interference, in

which case the user may be required to take adequate measures.

7thSense Design : 2 The Courtyard, Shoreham Road, Upper Beeding, BN44 3TN, UK

www.7thsense.one

When operating

When non-operating

(powered)

(not powered)

+15 to +30

-10 to +50 °C

10 to 90%

5 to 95%

≤ 2000 m

≤ 10000 m

Notes

Width incl. mounting ears: 483 mm

Autoranging, IEC 60320 inlet

Inlets at front, exhaust at side & rear

October 2020

Juggler Pixel Processor

User Guide

Safety and Handling

Customer Support Portal : http://portal.7thsense.one

Support

For any support issues with Juggler Pixel Processor units, please contact 7thSense directly.

Visit our customer support portal where you can find a wide range of support documentation and

video tutorials, together with contact information.

Warranty

Standard warranty is one year, return-to-supplier. Please contact 7thSense if you require an

extended warranty.

Please ask for instructions and request authorisation before returning a unit for repair.

Operating Instructions

Operating instructions for your Juggler can be found in the Online User Guides section of the

customer support portal.

Handling and Installation

Unpacking

Unpack your Juggler carefully onto a clean and level surface and examine it for any signs of transit

damage. Contact 7thSense immediately if anything appears to be damaged, or any parts missing.

Please retain all packaging in case of future need to return a Juggler.

Lifting

The weight of the Juggler unit is stated below and on the product label. Observe your internal

manual handling recommendations to avoid injury, especially when manoeuvring into a rack.

Rack mounting

Juggler units must be installed in a rack with load-bearing support along the sides, or on a shelf.

The front panel should be secured using an M6 rack mount bolt in each of the top and bottom

mounting holes on each side of the unit's front panel. These ears alone will not support the weight

of the unit.

Mount Jugglers with a minimum one-third rack-unit spacing.

Rack stability warnings:

Ensure the rack is stable (e.g. bolted to the floor) before sliding out the Juggler unit.

•

Do not place objects on equipment projecting from a rack (e.g. do not use as a shelf).

•

Only slide out one piece of equipment from the rack at a time.

•