HiBoost F20G-5S-LCD Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanjang HiBoost F20G-5S-LCD. HiBoost F20G-5S-LCD 20 halaman.

• BOOSTER – select location

•Install the booster in an area that is protected from the weather, properly

ventilated and is away from excessive heat and moisture.

• DONOR ANTENNA (OUTDOOR)- select location

•Mount the signal (outdoor) antenna in an elevated outdoor location so

that it points towards the cellular tower and away from where the inside

antenna will be located.

• OUTDOOR COAXIAL CABLE - select location

•The outdoor coaxial cable is used to connect the donor (outdoor) antenna

to the booster.

• INDOOR COAXIAL CABLE- (if used)

•The indoor coaxial cable is used to connect the server (indoor) antenna to

the booster.

• SERVER ANTENNA (indoor)

•The ideal location for the distribution antenna will be the area of your

property where you need to improve the signal most.

•NOTE:The signal strength will be strongest closest to the antenna.

•IMPORTANT: The signal antenna (outdoor)should always be separated from the

distribution antenna (indoor)by at least 20 vertical feet including the separation of

a thick barrier such as a roof or a wall. Depending on the strength of your outdoor

！

signal, the weaker the signal the less separation distance is required.

• ！

•LIGHTNING SURGE PROTECTOR- (SOLD SEPARATELY)

•The lightning surge protector connects in between the signal antenna and the

booster.

•IMPORTANT: Lightning surge protector must be grounded.

• COMMISSIONING THE SYSTEM

5 / 20