HiBoost F20G-5S-LCD User Manual - Page 5
Browse online or download pdf User Manual for Extender HiBoost F20G-5S-LCD. HiBoost F20G-5S-LCD 20 pages.
Print Page
• BOOSTER – select location
•Install the booster in an area that is protected from the weather, properly
1
ventilated and is away from excessive heat and moisture.
• DONOR ANTENNA (OUTDOOR)- select location
•Mount the signal (outdoor) antenna in an elevated outdoor location so
2
that it points towards the cellular tower and away from where the inside
antenna will be located.
• OUTDOOR COAXIAL CABLE - select location
•The outdoor coaxial cable is used to connect the donor (outdoor) antenna
3
to the booster.
• INDOOR COAXIAL CABLE- (if used)
•The indoor coaxial cable is used to connect the server (indoor) antenna to
4
the booster.
• SERVER ANTENNA (indoor)
•The ideal location for the distribution antenna will be the area of your
property where you need to improve the signal most.
5
•NOTE:The signal strength will be strongest closest to the antenna.
•IMPORTANT: The signal antenna (outdoor)should always be separated from the
distribution antenna (indoor)by at least 20 vertical feet including the separation of
a thick barrier such as a roof or a wall. Depending on the strength of your outdoor
6
！
signal, the weaker the signal the less separation distance is required.
• ！
•LIGHTNING SURGE PROTECTOR- (SOLD SEPARATELY)
•The lightning surge protector connects in between the signal antenna and the
booster.
7
•IMPORTANT: Lightning surge protector must be grounded.
• COMMISSIONING THE SYSTEM
8
5 / 20