IGS 228A Panduan Pengoperasian dan Pemeliharaan - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Penghemat Makanan IGS 228A. IGS 228A 12 halaman. Heat seal machines
Halaman CetakTHIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY
ADDITIONAL NOTES:
Temperature
NOTE
Fahrenheit/Centigrade (Celsius)
Conversion
The temperature controller can be
programmed to display either °F or °C.
To change:
Press the MODE button until the
temperature is displayed, then push and
hold the SET button for 10 seconds.
Timer
•
The controller has a count down timer that
automatically activates a buzzer at the
completion of the application.
•
Timer display is minutes:seconds. Range is
00:00 to 10:00, Colons (:) flash while timer is
running.
NOTE
The timer or buzzer may be stopped
while the handle is in the down
position by pressing both the DOWN
↓ ) arrow button and the UP ( ↑ ) arrow
(
button simultaneously. The timer will
automatically reset after the handle is
raised.
Counter
The controller has a built in cycle counter.
•
Press MODE button until the counter is
displayed.
•
Counter display range is 0000 to 9999.
•
To reset the cycle counter, display the counter
reading, then push and hold both UP (↑) and
DOWN (↓) arrow buttons for 3 seconds until
the counter resets to zero (0000) on the
display.
- 5 -