IGS 228A Bedienings- en onderhoudshandleiding - Pagina 5

Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} IGS 228A. IGS 228A 12 pagina's. Heat seal machines

THIS MACHINE IS DESIGNED TO BE OPERATED BY ONE OPERATOR ONLY

ADDITIONAL NOTES:

Temperature

NOTE

Fahrenheit/Centigrade (Celsius)

Conversion

The temperature controller can be

programmed to display either °F or °C.

To change:

Press the MODE button until the

temperature is displayed, then push and

hold the SET button for 10 seconds.

Timer

•

The controller has a count down timer that

automatically activates a buzzer at the

completion of the application.

•

Timer display is minutes:seconds. Range is

00:00 to 10:00, Colons (:) flash while timer is

running.

NOTE

The timer or buzzer may be stopped

while the handle is in the down

position by pressing both the DOWN

↓ ) arrow button and the UP ( ↑ ) arrow

(

button simultaneously. The timer will

automatically reset after the handle is

raised.

Counter

The controller has a built in cycle counter.

•

Press MODE button until the counter is

displayed.

•

Counter display range is 0000 to 9999.

•

To reset the cycle counter, display the counter

reading, then push and hold both UP (↑) and

DOWN (↓) arrow buttons for 3 seconds until

the counter resets to zero (0000) on the

display.

- 5 -