GAI-Tronics Commander CB Instalasi dan Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Telepon GAI-Tronics Commander CB. GAI-Tronics Commander CB 20 halaman. Weather resistant telephones
Halaman Cetak
5.3.3
For horizontal surfaces greater than 150 x 280mm use the free-standing
desk mounted method below.
To provide a 'rake' for convenient operation, the Front Casing may be
turned through 180° before it is fitted to the Rear Casing. Thus the cable
entries are at the rear of the telephone.
1. Ensure that the supplied rubber feet are fitted to the underside of
the Rear Casing.
2. Rotate the Front Casing through180° taking care not to trap any
wires.
3. Continue the installation by making the appropriate connections
(section 6).
4. Reconnect the handset / hookswitch. Secure the telephone Front
Casing to the Rear Casing.
6.
Connections and option settings
If glands are used, insert the cable through the gland body and tighten the gland nut
sufficiently to clamp the cable, making a seal. For Titan models with rear enclosure,
ensure sufficient cable is left to allow removal of the faceplate without straining the
cable.
14
Desk mounting / Rake
Titan CB, Commander CB