DynaGen GSC200 Instalasi dan Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Instalasi dan Panduan Pengguna untuk Pengontrol DynaGen GSC200. DynaGen GSC200 11 halaman. Auto start engine & transfer switch controller

Halaman Cetak
Utility sensing is measured from line to neutral and can accept voltages up to 300VAC. Single or three phase
sensing is user selectable in the GSC200 Configurator software.
AUTO LED: GREEN
The Auto LED will illuminate when the controller is placed into Auto.
HIGH TEMP LED: RED
The High Temp LED will illuminate when the High Temperature switch activates.
LOW OIL LED: RED
The Low Oil LED will illuminate when the Low Oil switch activates.
OVERCRANK LED: RED
The Overcrank LED will illuminate when the controller completes the selected amount of Crank tries without
successfully starting the Engine.
OVERSPEED LED: RED
Operating & Installation Manual for the GSC200 Controller

LED INDICATIONS

Auto LED
High Temp
Low Oil
OverCrank
Failure
Normal
Available
LCD Display
Auto
Manual
Off
OverSpeed Loss Speed Low Batt Engine Run
Transfer
Transfer
to
to
Emergency
Normal
Aux
Emergency
Available
8