GAI-Tronics 234WM-202 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon Darurat GAI-Tronics 234WM-202. GAI-Tronics 234WM-202 13 halaman. Wall-mount stanchion assembly

Halaman Cetak

Model 234WM-202 Wall-Mount Stanchion Assembly

Figure 9. Interconnection Diagram with DC-Powered Strobe

Repairing Surface Damage to Powder-Coated Stanchions

1. Carefully sand the damaged area to clean and score the base metal, taking care to minimize any

additional damage to the surrounding powder coating.

2. Wipe the sanded area with a cleaning solvent, such as DuPont "PrepSol" or equivalent. Allow the

area to dry. This type of product is normally available at auto parts stores. Denatured alcohol may

also be used.

3. Prepare the bare metal surface for painting by treating it with a phosphoric acid solution intended for

this purpose. The phosphoric acid solution is also normally available at auto parts stores. Allow the

area to dry.

4. Using a cotton-tipped swab or small brush, paint the prepared surface with an automotive enamel or

oil base polyurethane enamel such as Red Devil, Rustoleum, or equivalent. Do NOT use Krylon-type

paints. Carefully blend the repair enamel into the powder coat at the edges.

: Exact color matches may not be attainable.

OTE

p:\standard ioms - current release\42004 instr. manuals\42004-308g.docx

04/16

Pub. 42004-308G

Page 10 of 11