GAI-Tronics 234WM-202 사용자 설명서 - 페이지 10
{카테고리_이름} GAI-Tronics 234WM-202에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 234WM-202 13 페이지. Wall-mount stanchion assembly
Model 234WM-202 Wall-Mount Stanchion Assembly
Figure 9. Interconnection Diagram with DC-Powered Strobe
Repairing Surface Damage to Powder-Coated Stanchions
1. Carefully sand the damaged area to clean and score the base metal, taking care to minimize any
additional damage to the surrounding powder coating.
2. Wipe the sanded area with a cleaning solvent, such as DuPont "PrepSol" or equivalent. Allow the
area to dry. This type of product is normally available at auto parts stores. Denatured alcohol may
also be used.
3. Prepare the bare metal surface for painting by treating it with a phosphoric acid solution intended for
this purpose. The phosphoric acid solution is also normally available at auto parts stores. Allow the
area to dry.
4. Using a cotton-tipped swab or small brush, paint the prepared surface with an automotive enamel or
oil base polyurethane enamel such as Red Devil, Rustoleum, or equivalent. Do NOT use Krylon-type
paints. Carefully blend the repair enamel into the powder coat at the edges.
: Exact color matches may not be attainable.
N
OTE
p:\standard ioms - current release\42004 instr. manuals\42004-308g.docx
04/16
Pub. 42004-308G
Page 10 of 11