GAI-Tronics 370-901 Manual - Halaman 14
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman GAI-Tronics 370-901. GAI-Tronics 370-901 19 halaman. Sp2 to page/party bridge
Halaman Cetak
Model 370-901 SP2 to Page/Party
Channel and Redundant Channel Status
The C
S
and R
HANNEL
TATUS
for each channel:
Active—Y
or N
ES
O
Level to IP (mV)—audio signal level to SP2 system in millivolts
Level to Analog (mV)—signal level to Page/Party
VOX Input Level (mV)—signal level for voice activation in millivolts
or N
Isolated—Y
ES
O
or N
VLC Active—Y
ES
Stream Count—number of simultaneous audio streams passing through the bridge
Operation
®
The SP2 to Page/Party
Bridge provides real-time audio communication between SP2 and Page/Party
systems. No user interaction is required after the bridge is installed and configured. The bridge is
equipped with eight status LEDs to provide indication of the bridge's operation. A global disable button
is also provided to completely isolate the connected SP2 and Page/Party
Global Disable
Press and release the G
LOBAL
systems from each other. The switch operates as a toggle. Press the button to isolate the two systems.
Press the button again to enable bridging the two systems. The switch state is logically tied to the setting
configured in the GUDA software.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
®
Bridge
C
S
EDUNDANT
HANNEL
O
D
press-button switch (S1) to completely isolate the SP2 and Page/Party
IS
screens provide the following information
TATUS
®
system in millivolts
®
systems.
Pub. 42004-525A
Page 12 of 16
®
®