GAI-Tronics 370-901 매뉴얼 - 페이지 14
{카테고리_이름} GAI-Tronics 370-901에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 370-901 19 페이지. Sp2 to page/party bridge
페이지 인쇄
Model 370-901 SP2 to Page/Party
Channel and Redundant Channel Status
The C
S
and R
HANNEL
TATUS
for each channel:
Active—Y
or N
ES
O
Level to IP (mV)—audio signal level to SP2 system in millivolts
Level to Analog (mV)—signal level to Page/Party
VOX Input Level (mV)—signal level for voice activation in millivolts
or N
Isolated—Y
ES
O
or N
VLC Active—Y
ES
Stream Count—number of simultaneous audio streams passing through the bridge
Operation
®
The SP2 to Page/Party
Bridge provides real-time audio communication between SP2 and Page/Party
systems. No user interaction is required after the bridge is installed and configured. The bridge is
equipped with eight status LEDs to provide indication of the bridge's operation. A global disable button
is also provided to completely isolate the connected SP2 and Page/Party
Global Disable
Press and release the G
LOBAL
systems from each other. The switch operates as a toggle. Press the button to isolate the two systems.
Press the button again to enable bridging the two systems. The switch state is logically tied to the setting
configured in the GUDA software.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
®
Bridge
C
S
EDUNDANT
HANNEL
O
D
press-button switch (S1) to completely isolate the SP2 and Page/Party
IS
screens provide the following information
TATUS
®
system in millivolts
®
systems.
Pub. 42004-525A
Page 12 of 16
®
®