GAI-Tronics 370-901 매뉴얼 - 페이지 15
{카테고리_이름} GAI-Tronics 370-901에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. GAI-Tronics 370-901 19 페이지. Sp2 to page/party bridge
페이지 인쇄
Model 370-901 SP2 to Page/Party
System Reset
Hold the GLOBAL DIS press-button switch (S1) on the main PCBA for 8 seconds to reset the SP2 to
®
Page/Party
Bridge to factory default settings.
System Status LEDs
Eight status LEDs are located in the lower left corner on the main PCBA (see Figure 4). The status LEDs
provide indication that audio is present on each of the six audio lines, the state of the global disable
feature, and PCBA board status. All eight status LEDs are red. The audio line detection LEDs turn on
immediately when an audio channel on the Page/Party
instantly when the audio channel is closed; a VOX circuit keeps the channel open to ensure that the
channels are not disconnected with a pause in conversation.
LED
PL1
PL2
PL3
PL4
PL5
PG
G
LOBAL
S
TATUS
Ethernet Status LEDs
The bridge is equipped with three Ethernet status LEDs (see Figure 4 and Table 8).
LED
Color
A
yellow
CTIVITY
1G
green
100M
green
Maintenance
®
The SP2 to Page/Party
Bridge contains no user serviceable parts. There are no adjustments necessary
after the device is configured using the GUDA application. There are several options in the ADMIN box
of the GUDA application for maintenance of the bridge.
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-525A.docx
08/18
®
Bridge
Table 7. System Status LEDs
State
Description
On
activity on party line one
On
activity on party line two
On
activity on party line three
On
activity on party line four
On
activity on party line five
On
activity on page line
D
On
bridge is disabled
IS
Blinking
heartbeat LED blinks every five seconds
Table 8. Ethernet Status LED Indication
State
Description
Ethernet network status—The bridge is sending and/or receiving
blinking
packets on the Ethernet network.
On
1000 Mb connection link
On
100 Mb Ethernet link
®
system is active. The LEDs do not turn off
Pub. 42004-525A
Page 13 of 16