80/20 XDIY1404 Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Penyimpanan Alat 80/20 XDIY1404. 80/20 XDIY1404 3 halaman. On-demand workspace

Halaman Cetak

WORKBENCH

Here's a great solution to typical bulky workbenches

and makeshift areas. This Pop-Up Workbench built

with 80/20 saves space while adding functionality to

any garage or shop. It's strong and lightweight; the

Pop-Up Workbench can hold up to 200 pounds yet

still easily fold down to less than 3 inches from the

wall when not in use.

Angled supports are

simple to use and

ready to assemble

with all of the

hardware included.

This workbench is completely customizable; it

fits your space so you don't need to reconfigure

your garage or move fixtures. Unlike

prefabricated options, with the 80/20 Pop-Up

Workbench, you choose a height, width, depth

and color that fit your style and your area.

Talk to a design technician today to start

planning your own Pop-Up Workbench!

Use a bearing pad to

hold the top in place

and prevent the bars

from rubbing.

HOW

Slide two folding leg bars onto

45º support and tighten. Add

bearing pad to top bar. Install

hinges to outside of leg.

Build your table top in a

"U" shape, sliding supports

in one by one, and tighten

down firmly.

Slide table top frame onto

wall bracket hinges. Use

folding legs to support table

frame while tightening down.

Add legs to front of vertical

supports on wall bracket. Align

pad on top of leg underneath

horizontal bar bracket.

See the Pop-Up Workbench in

action! Check out the Xtreme

DIY video by 80/20 on YouTube.

Mount your horizontal bar to

the wall. Add center hinge

to bottom of bar. Slide in

vertical supports then hinges.

Preload bolts and T-nuts

into panel. Slide panel into

T-slots of table top frame.

Finish with end caps.