- ページ 2
工具収納 80/20 XDIY1404のPDF マニュアルをオンラインで閲覧またはダウンロードできます。80/20 XDIY1404 3 ページ。 On-demand workspace
ページを印刷するWORKBENCH
Here's a great solution to typical bulky workbenches
and makeshift areas. This Pop-Up Workbench built
with 80/20 saves space while adding functionality to
any garage or shop. It's strong and lightweight; the
Pop-Up Workbench can hold up to 200 pounds yet
still easily fold down to less than 3 inches from the
wall when not in use.
Angled supports are
simple to use and
ready to assemble
with all of the
hardware included.
This workbench is completely customizable; it
fits your space so you don't need to reconfigure
your garage or move fixtures. Unlike
prefabricated options, with the 80/20 Pop-Up
Workbench, you choose a height, width, depth
and color that fit your style and your area.
Talk to a design technician today to start
planning your own Pop-Up Workbench!
Use a bearing pad to
hold the top in place
and prevent the bars
from rubbing.
HOW
2
2
Slide two folding leg bars onto
45º support and tighten. Add
bearing pad to top bar. Install
hinges to outside of leg.
1
1
Build your table top in a
"U" shape, sliding supports
in one by one, and tighten
down firmly.
5
5
Slide table top frame onto
wall bracket hinges. Use
folding legs to support table
frame while tightening down.
4
4
Add legs to front of vertical
supports on wall bracket. Align
pad on top of leg underneath
horizontal bar bracket.
See the Pop-Up Workbench in
action! Check out the Xtreme
DIY video by 80/20 on YouTube.
3
3
Mount your horizontal bar to
the wall. Add center hinge
to bottom of bar. Slide in
vertical supports then hinges.
6
6
Preload bolts and T-nuts
into panel. Slide panel into
T-slots of table top frame.
Finish with end caps.