Gainbridge GT3088 Petunjuk Manual - Halaman 11
Jelajahi secara online atau unduh pdf Petunjuk Manual untuk GPS Gainbridge GT3088. Gainbridge GT3088 17 halaman. Magnetic & portable gps tracker with
a. Tosleep : Device will enter deep sleep in appointed time
b. Callsleep : Call alert when system ends deep sleep function.
c. Intervalsleep : Device will enter deep sleep in appointed time interval
d. Sleeptime : To set deep sleep period
e. Timed Data Upload : 10 consecutive location data packets will be uploaded based on a start
time
f. Periodsleepoff : Location data will be upload at appointed time period, up to 10 periods
11.1 To Sleep
When non-movement is detected for appointed time period (minutes), system will enter deep sleep
function. The device will end deep sleep when movement is detected. Once motion stops, the
Device will enter Deep Sleep again after the appointed time period if no new motion, command or
call is received.
11.1.1 SMS:
*tosleep*3-99*
(3-99 represents minutes of non-movement. )
Device Response:
11.1.1.1 SMS:
*tosleepcall*3-99*
(3-99 represents minutes of non-movement.)
When no movement is detected for XX minutes, system will enter deep sleep function with a call
alert to the Master Controller every time.
Device Response:
alert."
11.1.1.2 SMS:
*tosleepsms*3-99*
When non-movement is detected for XX minutes, system will enter deep sleep function with an
SMS alert to the Master Controller to notice owner tracker is going to enter deep sleep mode
Device Response:
SMS alert."
11.1.2 SMS:
*tosleepoff*
(3-99 represents minutes of non-movement.)
Device Response:
11.2 Call sleep
SMS:
*callsleep*1-99*
The Device will enter deep sleep function immediately when command is received. The Master
Controller will receive a call alert when system ends deep sleep function.
Device Response:
for every XX hours."
SMS:
*callsleepoff*
Device Response:
11.3 Deep sleep
In Deep Sleep, The Device will enter deep sleep function once the command is received. After the
deep sleep interval, the device timer activates the device for 12 minutes to acquire and upload
"System will enter deep sleep function after XX minutes non-movement."
"System will enter deep sleep function after XX minutes no movement with call
(03-99 represents minutes of non-movement. )
"System will enter deep sleep function after XX minutes non-movement with
"System has ended tosleep function."
(1-99 represents hours of deep sleep period.)
"System is going to enter deep sleep function, and will be ended with call alert
"System has ended deep sleep function."
11 / 17