Gainbridge GT3088 Petunjuk Manual - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk GPS Gainbridge GT3088. Gainbridge GT3088 17 halaman. Magnetic & portable gps tracker with

Halaman Cetak
Gainbridge GT3088 Petunjuk Manual
11.5.3 SMS:
*timinglocatepmap*XXXX*XXXX**XXXX*
(XXXX represent time and minus, minimum unit is 30 minutes, maximum timing setting is 10. EG
*timingsleepmap*0800*1100*1400*1830*
You will receive back a text message with a Google map link. Click the link in order to view the
location through your smartphone browser.
11.5.4 SMS:
*timinglocateoff*
Device Response:
11.6 Period Data Upload
SMS:
*periodlocate*XXXXXXXX**XXXXXXXX*
unit is 30 minutes, maximum timing setting is 10. EG
means 8am-11am, 2pm-6:30pm of the day)
Device will enter deep sleep function once command is received.
Device will be activated at appointed period of time, starts GPS and upload location data in
3-7mins.Master controller will
date, time and ranking.
If no GPS signal is found, cell tower information will be sent instead.
Device will enter deep sleep function again if no new command is received during the 12 minutes
activating time.
11.7 SMS:
*periodlocateoff*
Device Response:
*Note：This commend will only be received when system is activated after the previous deep sleep
period.
12. Geo-fencing
The device is equipped with an automatic Geo-Fencing function that will, on command set a
01-99km radius "bubble" around the device. Movement within this area is ignored. Crossing outside
can become an SMS alert. To set the Geo-Fence, from the master controller;
12.1 SMS
*fence*1-99*
Device Response:
Movement that exits the geo-fence will be immediately texted to the master controller as a
"Geo-Fence Exit Alert."
12.2 Disable the Geo-fence
SMS
*fenceoff*
Device Response:
It should be noted, that if you disable the SMS, Movement Alert and the Movement Call Alert; but
have the Geo-Fence Alert in place, the first message notifying you of movement will be the
Geo-Fence Exit.
"System has ended timing locate function.
receive back a text include latest information of latitude, longitude,
"System has ended deep sleep function."
"The Geo-Fence is set. Radius is set to XXX km"
"The Geo-fence is disabled."
means 8am, 11 am, 2pm and 6:30pm of the day)
(XXXX represent time and minutes, minimum
*periodlocate*08001100*14001830*
13 / 17