Gainscha GA-F3300 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Gainscha GA-F3300. Gainscha GA-F3300 14 halaman. 80mm thermal receipt printer

Thermal Receipt Printer

3. Serial Port Connection (If you need to set the port to Serial)

a. Click step "Port - COM2 – Finish"

Select a serial port based on the following path:

"Computer→ Properties→ Device Manager→ Port (COM and

LPT) USB Serial Port (COMX) → Click "Configure port".

c. The Settings are finished.

b. Refer to the default baud rate of the printer self-testing

page, enter the same baud rate 19200, otherwise there will be

errors in printing. Click "Apply" after confirming the

parameters.

d. Return to the "General" and click "Print test page". If the

print test page works normally, the setting is successful.