Gainscha GA-F3300 사용자 설명서 - 페이지 13

{카테고리_이름} Gainscha GA-F3300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainscha GA-F3300 14 페이지. 80mm thermal receipt printer

Thermal Receipt Printer

3. Serial Port Connection (If you need to set the port to Serial)

a. Click step "Port - COM2 – Finish"

Select a serial port based on the following path:

"Computer→ Properties→ Device Manager→ Port (COM and

LPT) USB Serial Port (COMX) → Click "Configure port".

c. The Settings are finished.

b. Refer to the default baud rate of the printer self-testing

page, enter the same baud rate 19200, otherwise there will be

errors in printing. Click "Apply" after confirming the

parameters.

d. Return to the "General" and click "Print test page". If the

print test page works normally, the setting is successful.