8devices Korlan USB2CAN Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Antarmuka USB 8devices Korlan USB2CAN. 8devices Korlan USB2CAN 17 halaman. High quality isolated usb to can interface
Juga untuk 8devices Korlan USB2CAN: Panduan Pengguna (15 halaman)
Halaman Cetak
If the driver installation was successful, USB2CAN Info LED should be off, Error LED should be on.
Run USB2CAN test application (can be downloaded from 8devices WEB page). Test application should
find all USB to CAN devices connectd to PC and their serial numbers. Insert the device's serial number you
would like to use and press "Open":
4.4 USB2CAN test application bus speed configuration
For a proper operation a correct serial number and bus speed must be entered. Serial number is located on
USB2CAN label.
Standard CAN bus speed configuration
Input format is: "serial number;can bus speed", speed options 20, 50, 100, 125, 250, 500, 800,1000
Example: 664E01CF;125
Customized CAN bus speed configuration
For a customized speed, the bus speed setting must be set to "0" with additional configuration parameters.
The additional parameters are written directly to internal microcontroller timing register.
Input format is: "serial number;0;tseg1;tseg2;sjw;brp"
Example: 664E01CF;0;12;34;22;11
More details how to configure customized speed can be found at
http://www.bittiming.can-wiki.info
Note: on the WEB page drop down menu select "ST Microelectronics bxCAN" and "Clock Rate" = 32MHz
USB2CAN
User Guide
17