8devices Korlan USB2CAN 사용자 설명서 - 페이지 17

{카테고리_이름} 8devices Korlan USB2CAN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 8devices Korlan USB2CAN 17 페이지. High quality isolated usb to can interface
8devices Korlan USB2CAN에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄

If the driver installation was successful, USB2CAN Info LED should be off, Error LED should be on.

Run USB2CAN test application (can be downloaded from 8devices WEB page). Test application should

find all USB to CAN devices connectd to PC and their serial numbers. Insert the device's serial number you

would like to use and press "Open":

4.4 USB2CAN test application bus speed configuration

For a proper operation a correct serial number and bus speed must be entered. Serial number is located on

USB2CAN label.

Standard CAN bus speed configuration

Input format is: "serial number;can bus speed", speed options 20, 50, 100, 125, 250, 500, 800,1000

Example: 664E01CF;125

Customized CAN bus speed configuration

For a customized speed, the bus speed setting must be set to "0" with additional configuration parameters.

The additional parameters are written directly to internal microcontroller timing register.

Input format is: "serial number;0;tseg1;tseg2;sjw;brp"

Example: 664E01CF;0;12;34;22;11

More details how to configure customized speed can be found at

http://www.bittiming.can-wiki.info

Note: on the WEB page drop down menu select "ST Microelectronics bxCAN" and "Clock Rate" = 32MHz

USB2CAN

User Guide