ActiveProducts XE06 Panduan Pemilik - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Mesin Cuci Tekanan ActiveProducts XE06. ActiveProducts XE06 10 halaman. 1600 psi electric pressure washer

Halaman Cetak

IMPORTANT PRECAUTIONS – READ FIRST

Warnings

When using this product, basic precautions should always be followed:

• Read all the instructions before using the product.

• Water spray must never be directed toward any electric wiring, devices or directly toward

the pressure washer machine itself, or fatal electric shock may occur.

• To reduce the risk of injury, do not operate the machine near children.

• Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with

the controls.

• Stay alert—watch what you are doing.

• For use with cold water supply only. Do not draw other liquids.

• The pressure washer should not be used in areas where gas vapours may be present. An

electric spark could cause an explosion or fire.

• To minimize the amount of water getting into the pressure washer, the unit should be

placed as far as possible from the cleaning site during operation.

• Avoid accidental starts. Shut power "OFF" before connecting or disconnecting cord to

electrical outlets.

• Do not operate the product when fatigued or under the influence of alcohol or drugs.

• Do not stand on unstable surfaces. Stand with both feet balanced at all times.

• Prior to starting the pressure washer in cold weather, be sure ice has not formed on any

part of the equipment.

• Never carry your pressure washer by the cord.

• Do not pull on the cord to disconnect from the outlet.

• To allow free air circulation, the pressure washer should not be covered during operation.

• Keep operating area clear of people and pets.

• Follow the maintenance instructions specified in the manual.

if replacement of the plug or cord is needed, use only identical replacement parts.

• This product or its power cord contains lead, a chemical known to cause cancer, birth

defects or other reproductive harm. Wash hands after use.

Warnings

• Do not use with flammable liquids and toxic chemicals.

• Injection Hazard: Equipment can cause serious injury if the spray penetrates the skin.

• Do not point the gun at anyone or any part of the body. In case of penetration, seek

medical aid immediately.

• This system is capable of producing high pressure as rated in the Technical Specifi-

cations. To avoid rupture and injury, do not operate this machine with components

rated less than the unit itself (including but not limited to spray guns, hose and

hose connections).

• Before servicing, cleaning or removal of any parts, shut "OFF" power and

relieve pressure.

• Do not spray electrical apparatus and wiring.

• If connection is made to a portable water system, the system must be protected

against backflow.

IMPORTANT PRECAUTIONS – READ FIRST

WARNING - Risk of Injury

Do Not Direct Discharge Stream at Persons.

• High-pressure jet can be dangerous if misused.

• The jet must not be directed at persons, animals, electrical devices, or the unit itself.

WARNING - Risk of Explosion

• Do not spray flammable liquids.

• Do not use acids and solvents in this product.

• These products can cause physical injuries to the operator and irreversible damage

to the machine.

CAUTION - Gun Kicks Back

• Hold with both hands

• The trigger gun safety lock prevents the trigger from being engaged accidentally.

• The safety feature DOES NOT lock trigger in the ON position.

WARNING - Risk of Electric Shock

• Inspect cord before using - do not use if cord is damaged.

• Keep all connections dry and off the ground.

• Do not touch plug with wet hands.

• Do not use extension cords longer than 50' (15.2 m). Only use 12 or 14 AWG rated

extension cords.

Save These Instructions

In a double-insulation product, two systems of insulation are provided instead of

grounding. No grounding is provided on a double-insulated product, nor should a

means for grounding be added to the product. Servicing a double-insulated

product requires extreme care and knowledge of the system, and should be

done only by qualified service personnel.

Replacement parts of a double-insulated product must be identical to the parts they

replace. A double-insulated product is marked with the words "DOUBLE INSULATION"

or "DOUBLE INSULATED" . The symbol " " may also be marked on the product.