activTek AP3000 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara activTek AP3000. activTek AP3000 12 halaman. Portable whole home office system
Juga untuk activTek AP3000: Manual (16 halaman), Panduan Pengguna (12 halaman)
Halaman Cetak
REMOVING THE REAR LINT SCREEN
To Remove:
Rear Lint Screen
follow steps 1 - 5
Purifier Plate
follow steps 1 - 6
ActivePure (RCI) cell
follow steps 1 - 10
REMOVING THE PURIFIER PLATE & ACTIVEPURE (RCI) CELL
8
3
3. Remove
back cover.
Press the
sides to
unlatch,
then tilt the
bottom out
to remove.
6
6. To remove the
purification
plate, grasp
edge of plate in
the center and
gently pull out.
NOTE: If the
plate is difficult
to remove, gently
press down on
the lower metal
contact tab.
9
9. Remove
two (2)
thumbscrews.
1
1. Unplug unit.
4
4. Remove two
thumbscrews
securing the
top of the lint
screen.
7
7. Unlock the
ActivePure
(RCI) cell
connector
by pressing
on the
connector's
locking tabs.
10
10. Slide the
ActivePure
(RCI) cell
down and out
of unit.
2
2. Remove
the back
cover
screw.
5
5. Remove
the lint
screen by
pulling
back the
top, then
lifting up
and out.
8
8. Pull the
connector
straight out
to unplug.
WARNING: Do not operate
AP3000 by activTek without the
rear lint screen and back cover
properly installed.