activTek AP3000 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembersih Udara activTek AP3000. activTek AP3000 12 halaman. Portable whole home office system
Juga untuk activTek AP3000: Manual (16 halaman), Panduan Pengguna (12 halaman)

Halaman Cetak

MAINTENANCE REMINDERS

REPLACE PLATE

The purifier plate is not functioning properly .

• Replace the old purifier plate with a new purifier plate

(available from your local activTek Distributor)

REPLACE RCI CELL

The ActivePure (RCI) cell is no longer working correctly .

• Replace the ActivePure (RCI) cell (replacement cells are

available from your local activTek Distributor)

• Please Note: The ActivePure (RCI) cell should be

replaced every year if used continuously, even if the unit

does not display this message. Replace every two (2)

years if used less than 12 hours a day

PERFORM CLEANING

(approx . every 30 days)

• Clean the rear lint screen (see page 6) .

ActivePure (RCI) cell.

• Vacuum the

• Clean the purifier plate (see page 7) .

• Vacuum front and rear grill openings .

RESETTING THE REMINDERS

The only reminder you need to reset is the PERFORM

CLEANING reminder (after performing maintenance,

press the Reminder Reset button and the screen will

momentarily light up, then return to its original mode) . All

the other service reminders will clear automatically once

the unit has been turned off and back on and the problem

has been corrected .

GENERAL MAINTENANCE

CAUTION: Unplug the unit before performing any

maintenance procedures.

Periodic maintenance is required to ensure that your

AP3000 by activTek operates properly . The unit will

display a PERFORM CLEANING reminder when it's time

GENERAL MAINTENANCE

to perform regular maintenance . If you are operating

your unit in a severely polluted environment, cleaning of

the unit, purifier plate, ActivePure (RCI) cell, and rear lint

screen should be done more frequently . Shown here are

basic procedures that should be carried out to keep your

unit running at top performance .

For optimal performance, and to prevent damage not

covered by your warranty, install the optional AP3000

purifier prefilter .

Failure to perform routine maintenance could adversely

affect the proper function of the unit or cause it to fail

prematurely .

NOTE: If a unit is returned for repair, and it is determined

that neglect of the unit or unauthorized tampering with

any mechanical or electronic component of the unit

caused the failure, activTek reserves the right to void the

product warranty . This will require the owner to pay for

any required repairs .

Be sure to

CLEANING THE CASE:

press the

Reminder

Wipe the unit with a soft cloth dampened (not wet) with

Reset button

to clear the

water . Do not use chemicals or solvents . Vacuum the front

reminder

following

and rear grills periodically to remove any lint buildup .

regular

CLEANING THE ACTIVEPURE (RCI) CELL:

maintenance

(see below).

Remove the ActivePure (RCI) cell and carefully vacuum

accumulated lint . Do not wash the ActivePure (RCI) cell .

Damage from water may result .

REAR LINT SCREEN CLEANING:

You have two options to clean the rear lint screen:

1 . When visibly dirty, simply remove the rear lint screen

from the unit (see pages 8 - 9), and with a hand-held

vacuum, remove the heavy particulate . This method will

extend the life of the lint screen .

2 . When visibly dirty, remove the lint screen from the

unit (see pages 8 - 9), carefully vacuum, then wash

in hot water (do not use soap) . Allow to dry prior to

reinstalling . Replace if damaged .

REAR LINT SCREEN REPLACEMENT:

Contact your activTek Distributor for replacement lint

screens . See pages 8 - 9 for removal and installation

instructions .

(CONT .)