activTek AP3000 Manuel de l'utilisateur - Page 6
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} activTek AP3000. activTek AP3000 12 pages. Portable whole home office system
Également pour activTek AP3000 : Manuel (16 pages), Manuel de l'utilisateur (12 pages)
Imprimer la page
MAINTENANCE REMINDERS
REPLACE PLATE
The purifier plate is not functioning properly .
• Replace the old purifier plate with a new purifier plate
(available from your local activTek Distributor)
REPLACE RCI CELL
The ActivePure (RCI) cell is no longer working correctly .
• Replace the ActivePure (RCI) cell (replacement cells are
available from your local activTek Distributor)
• Please Note: The ActivePure (RCI) cell should be
replaced every year if used continuously, even if the unit
does not display this message. Replace every two (2)
years if used less than 12 hours a day
PERFORM CLEANING
(approx . every 30 days)
• Clean the rear lint screen (see page 6) .
ActivePure (RCI) cell.
• Vacuum the
• Clean the purifier plate (see page 7) .
• Vacuum front and rear grill openings .
RESETTING THE REMINDERS
The only reminder you need to reset is the PERFORM
CLEANING reminder (after performing maintenance,
press the Reminder Reset button and the screen will
momentarily light up, then return to its original mode) . All
the other service reminders will clear automatically once
the unit has been turned off and back on and the problem
has been corrected .
GENERAL MAINTENANCE
CAUTION: Unplug the unit before performing any
maintenance procedures.
Periodic maintenance is required to ensure that your
AP3000 by activTek operates properly . The unit will
display a PERFORM CLEANING reminder when it's time
6
GENERAL MAINTENANCE
to perform regular maintenance . If you are operating
your unit in a severely polluted environment, cleaning of
the unit, purifier plate, ActivePure (RCI) cell, and rear lint
screen should be done more frequently . Shown here are
basic procedures that should be carried out to keep your
unit running at top performance .
For optimal performance, and to prevent damage not
covered by your warranty, install the optional AP3000
purifier prefilter .
Failure to perform routine maintenance could adversely
affect the proper function of the unit or cause it to fail
prematurely .
NOTE: If a unit is returned for repair, and it is determined
that neglect of the unit or unauthorized tampering with
any mechanical or electronic component of the unit
caused the failure, activTek reserves the right to void the
product warranty . This will require the owner to pay for
any required repairs .
Be sure to
CLEANING THE CASE:
press the
Reminder
Wipe the unit with a soft cloth dampened (not wet) with
Reset button
to clear the
water . Do not use chemicals or solvents . Vacuum the front
reminder
following
and rear grills periodically to remove any lint buildup .
regular
CLEANING THE ACTIVEPURE (RCI) CELL:
maintenance
(see below).
Remove the ActivePure (RCI) cell and carefully vacuum
accumulated lint . Do not wash the ActivePure (RCI) cell .
Damage from water may result .
REAR LINT SCREEN CLEANING:
You have two options to clean the rear lint screen:
1 . When visibly dirty, simply remove the rear lint screen
from the unit (see pages 8 - 9), and with a hand-held
vacuum, remove the heavy particulate . This method will
extend the life of the lint screen .
2 . When visibly dirty, remove the lint screen from the
unit (see pages 8 - 9), carefully vacuum, then wash
in hot water (do not use soap) . Allow to dry prior to
reinstalling . Replace if damaged .
REAR LINT SCREEN REPLACEMENT:
Contact your activTek Distributor for replacement lint
screens . See pages 8 - 9 for removal and installation
instructions .
(CONT .)