activTek AP3000 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Pembersih Udara activTek AP3000. activTek AP3000 16 halaman. Portable whole home office system
Juga untuk activTek AP3000: Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman)

Halaman Cetak

INSTALLING THE PURIFIER PLATE & ACTIVEPURE® (RCI) CELL

When installing the purification plate, be sure that the metal tabs are making contact with the screen on each side of

the plate .

INSTALLING THE FILTER ASSEMBLY

WARNING: Do not operate AP3000 without the Filter Assembly and back cover properly installed .

1. Slide the ActivePure® (RCI) Cell up

3. Insert the ActivePure® (RCI) Cell

connector into the plug on the plate

cage. Press the connector firmly until

the two tabs lock into place.

1. Replace the Filter

Assembly, inserting

the bottom of the

Filter Assembly first.

NOTE: The bottom of the Filter Assembly

is held into place by two alignment

guides (see insert).

3. Replace the back

cover by snapping

into place.

and into the unit. Be sure the back lip

of the ActivePure® (RCI) Cell engages

the two slotted protrusions at the

rear of the plate cage, and that the

angle brackets and studs are correctly

aligned.

4. Replace the back

cover screw.

2. Replace the two (2)

thumbscrews and

tighten.

4. Gently insert the purifier

plate between the guides

(inside the cage) until it

stops.

2. Secure the top of the Filter

Assembly by replacing the

two (2) Filter Assembly

holder thumbscrews.

5. Reinstall the

power cord.

For disassembly instructions, see page 11.