activTek AP3000 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Pembersih Udara activTek AP3000. activTek AP3000 16 halaman. Portable whole home office system
Juga untuk activTek AP3000: Panduan Pengguna (12 halaman), Panduan Pengguna (12 halaman)

Halaman Cetak

REMOVING THE FILTER ASSEMBLY

WARNING:

Do not operate the AP3000 without the Filter Assembly and back cover properly installed .

3. Remove back cover. Press

the sides to unlatch, then tilt

the bottom out to remove.

REMOVING THE PURIFIER PLATE & ACTIVEPURE® (RCI) CELL

WARNING: Do not operate AP3000 without the Filter Assembly and back cover properly installed .

1. To remove the purification plate, grasp edge

of plate in the center and gently pull out.

NOTE: If the plate is difficult to remove,

3. Pull the connector

1. Unplug unit.

4. Remove two (2)

thumbscrews securing the

top of the Filter Assembly.

gently press down on the lower

metal contact tab

straight out to unplug.

NOTE:

2. Remove the back

cover screw.

5. Remove the Filter Assembly

by pulling back the top, then

lifting up and out.

4. Remove two (2)

thumbscrews.

Use genuine activTek

replacement parts

only . Parts from

anyone other than

activTek may damage

your unit and void

your warranty .

2. Unlock the ActivePure® (RCI)

Cell connector by pressing on

the connector's locking tabs.

5. Slide the

ActivePure® (RCI)

Cell down and

out of unit.