activTek AP3000 매뉴얼 - 페이지 11

{카테고리_이름} activTek AP3000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek AP3000 16 페이지. Portable whole home office system
activTek AP3000에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄

REMOVING THE FILTER ASSEMBLY

WARNING:

Do not operate the AP3000 without the Filter Assembly and back cover properly installed .

3. Remove back cover. Press

the sides to unlatch, then tilt

the bottom out to remove.

REMOVING THE PURIFIER PLATE & ACTIVEPURE® (RCI) CELL

WARNING: Do not operate AP3000 without the Filter Assembly and back cover properly installed .

1. To remove the purification plate, grasp edge

of plate in the center and gently pull out.

NOTE: If the plate is difficult to remove,

3. Pull the connector

1. Unplug unit.

4. Remove two (2)

thumbscrews securing the

top of the Filter Assembly.

gently press down on the lower

metal contact tab

straight out to unplug.

NOTE:

2. Remove the back

cover screw.

5. Remove the Filter Assembly

by pulling back the top, then

lifting up and out.

4. Remove two (2)

thumbscrews.

Use genuine activTek

replacement parts

only . Parts from

anyone other than

activTek may damage

your unit and void

your warranty .

2. Unlock the ActivePure® (RCI)

Cell connector by pressing on

the connector's locking tabs.

5. Slide the

ActivePure® (RCI)

Cell down and

out of unit.