activTek AP3000 매뉴얼 - 페이지 14

{카테고리_이름} activTek AP3000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek AP3000 16 페이지. Portable whole home office system
activTek AP3000에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지)

페이지 인쇄

TROUBLESHOOTING (CONT.)

7. How can I tell if the ActivePure® (RCI) Cell is functioning?

• The ActivePure® (RCI) Cell will produce a glow that is visible through the front grill under low light conditions (if the bulb

and catalyst coated honeycomb are not contaminated with deposits of foreign material such as tar or nicotine) .

CAUTION: Do not look directly at the glowing lamp . Prolonged exposure, even to reflected UV light, can

NOTE: The UV output of the RCI Cell bulb will decrease over time and should be changed every year if used

continuously, or every two (2) years if used less than 12 hours a day, even if the bulb is still producing light

8. Unit does not operate.

• Make sure the unit is plugged in .

• Make sure your outlet is active .

• Make sure the Filter Assembly and back cover are properly installed .

If your unit fails to operate properly after performing trouble-shooting, contact your Independent activTek Distributor

for further assistance . You may also contact activTek Customer Service at:

1-866-736-0503 or visit www.activTek.net for additional support

REPLACEMENT PARTS LIST

Item # US70728: Ozone-Producing ActivePure® (RCI) Cell output (Normal Mode): > 0 .05 ppm ozone (ambient room

Item # US71090: Ozone-Free ActivePure® (RCI) Cell output (Normal Mode): 0 ppm ozone (produces no ozone)

Item # US70171: Purification Plate

Item # US70730: Filter Assembly

Item # 9950117: Power Supply with U .S . and Euro Cords

Item # 9950123: Optional Harsh Environment Prefilter

cause eye damage according to the American Conference of Governmental Industrial Hygienists

(ACGIH Standards) .

concentration)