Autonics LSE-4A5R2 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Sensor Keamanan Autonics LSE-4A5R2. Autonics LSE-4A5R2 12 halaman. 2d laser scanners
Juga untuk Autonics LSE-4A5R2: Panduan Produk (5 halaman)

Halaman Cetak

▣ Function

Setting method

Functions

Sensor position

Activated channel(s)

Monitoring zone width (W), height (H)

Concentrated monitoring zone

Sensitivity level

Minimum size of the scanning target

Monitoring time

Output

Teaching

Password

Initialization (except password)

IP initialization

Setting value initialization (except IP)

Sensor position

- Set the actual installed laser scanner position: view (top or bottom) and installation (left, right, or center).

- When a user look at the installed laser scanner and the sensor top, set the top view or the sensor bottom, set the bottom view.

- Setting range: Left, Right, Center

Top view, Botton view

※ Factory default: Bottom view, Left installation

※ In case of left or right installation, setting value of monitoring zone width (W) and height (H) must be entered.

※ In case of center installation, monitoring zone width (W), height (H) is not changeable.

E.g.) Platform screen door (PSD)

● Bottom view, right installation

Activated channel(s)

- The laser scanner has 4 channels (Ch1, Ch2, Ch3, Ch4).

- Activate the channel(s) for obstacle detection.

※ Factory default: Ch1, Ch2, Ch3, Ch4 activated

Remote control (RMC-LS)

Ch1 Ch2 Ch3

Ch4

Laser scanner program (atLidar)

● Top view, left installation

Laser Scanner

D-9