dynarex 10404 Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Produk Perawatan Pribadi dynarex 10404. dynarex 10404 16 halaman. Full electric bed with emergency hand crank

UNPACKING THE BED
1. Join the head and foot section. Remove the head deck section of the bed from the packaging and
place it on its side to your RIGHT with the center mounting latches on your LEFT.
2. Remove foot deck section of the bed from the packaging and place it on its side to your LEFT with
the center mounting rivets facing on your RIGHT.
3. The head and foot end sections of the bed should now be on their side at a 130° angle to one
another.
4. Hook the TOP center mounting latch on the HEAD deck section with the TOP center mounting rivet
on the FOOT deck section.
5. With one (1) person holding the TOP of the bed together, have the other person hook the BOTTOM
center mounting latch on the HEAD end section with the BOTTOM center mounting rivet on the
FOOT end section.
NOTE: It may be necessary to grasp the center support of the foot end section of the bed so that the
BOTTOM center rivet can be maneuvered into the BOTTOM center mounting latch. It may be
necessary to slightly lift the head OR foot end sections of the bed to secure the center rivets into the
center mounting latches.
Foot Deck Section

BED ASSEMBLY

Center Support
130º Angle
Head Deck
Section
5
Mounting
Latch
Mounting
Rivet