dynarex 10404 매뉴얼 - 페이지 5

{카테고리_이름} dynarex 10404에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dynarex 10404 16 페이지. Full electric bed with emergency hand crank

UNPACKING THE BED

1. Join the head and foot section. Remove the head deck section of the bed from the packaging and

place it on its side to your RIGHT with the center mounting latches on your LEFT.

2. Remove foot deck section of the bed from the packaging and place it on its side to your LEFT with

the center mounting rivets facing on your RIGHT.

3. The head and foot end sections of the bed should now be on their side at a 130° angle to one

another.

4. Hook the TOP center mounting latch on the HEAD deck section with the TOP center mounting rivet

on the FOOT deck section.

5. With one (1) person holding the TOP of the bed together, have the other person hook the BOTTOM

center mounting latch on the HEAD end section with the BOTTOM center mounting rivet on the

FOOT end section.

NOTE: It may be necessary to grasp the center support of the foot end section of the bed so that the

BOTTOM center rivet can be maneuvered into the BOTTOM center mounting latch. It may be

necessary to slightly lift the head OR foot end sections of the bed to secure the center rivets into the

center mounting latches.

Foot Deck Section

BED ASSEMBLY

Center Support

130º Angle

Head Deck

Section

Mounting

Latch

Mounting

Rivet