iHealth BG5 Panduan Pemilik - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pengukur Glukosa Darah iHealth BG5. iHealth BG5 16 halaman. Wireless smart gluco-monitoring system
Juga untuk iHealth BG5: Panduan Memulai Cepat (13 halaman), Panduan Memulai Cepat (2 halaman), Panduan Memulai Cepat (7 halaman)
Halaman Cetak
Step 3: Follow Steps 1-4 of "Performing an Offline
Control Solution Test"
Step 4: the Control Solution test result will appear on the
iOS device.
Out-of-Range Results
Results falling outside the specified
range may be caused by:
• Error in performing the test
• Expired or contaminated Control
Solution
• Expired or contaminated test strip
• iHealth Wireless Smart
Gluco-Monitoring System (BG5)
malfunction.
If you continue to get Control Solution test results that fall
outside of the range printed on the vial, the meter may not
be working properly. Discontinue use and call iHealth Labs
Customer Service at +1-855-816-7705 for assistance.
To purchase additional Control Solution, call iHealth Labs
Customer Service at +1-855-816-7705.
Note: Do not use expired Control Solution.
The control solution range printed on the test strip vial is for
Control Solution use only. It is not a recommended range for
your blood glucose level.
IMPORTANT INFORMATION ABOUT CONTROL SOLUTION
TESTS
When performing a Control Solution test to check your
glucose level, be sure to select the Control Solution test on
the app. Control Solution tests conducted in regular testing
mode will save results with regular test results, which may
yield inaccurate blood glucose levels.
16
METER MEMORY
Offline measurement mode：(not using iOS device)
The Wireless Smart Glucose Meter stores up to 500 of your
most recent blood glucose test results along with their
respective dates and times.
Reviewing Test Results
1. Press and release "Memory Button" on the meter.
Press the Memory Button to view the test results stored in
the meter. The first reading you'll see is your most recent
blood glucose result.
Note: When the meter memory is full, the oldest test result
will be deleted automatically, and the newest test result will
be saved.
2. Exit the Memory Mode
When you reach the last test result, the word "End" will
appear, and the meter will turn off automatically.
If you do not operate the meter in 30 seconds, it will turn off
automatically.
mg/dL
17