- ページ 10

血糖測定器 iHealth BG5のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。iHealth BG5 16 ページ。 Wireless smart gluco-monitoring system
iHealth BG5 にも：クイック・スタート・マニュアル (13 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (7 ページ)

ページを印刷する

Step 3: Follow Steps 1-4 of "Performing an Ofﬂine

Control Solution Test"

Step 4: the Control Solution test result will appear on the

iOS device.

Out-of-Range Results

Results falling outside the speciﬁed

range may be caused by:

• Error in performing the test

• Expired or contaminated Control

Solution

• Expired or contaminated test strip

• iHealth Wireless Smart

Gluco-Monitoring System (BG5)

malfunction.

If you continue to get Control Solution test results that fall

outside of the range printed on the vial, the meter may not

be working properly. Discontinue use and call iHealth Labs

Customer Service at +1-855-816-7705 for assistance.

To purchase additional Control Solution, call iHealth Labs

Customer Service at +1-855-816-7705.

Note: Do not use expired Control Solution.

The control solution range printed on the test strip vial is for

Control Solution use only. It is not a recommended range for

your blood glucose level.

IMPORTANT INFORMATION ABOUT CONTROL SOLUTION

TESTS

When performing a Control Solution test to check your

glucose level, be sure to select the Control Solution test on

the app. Control Solution tests conducted in regular testing

mode will save results with regular test results, which may

yield inaccurate blood glucose levels.

METER MEMORY

Ofﬂine measurement mode：(not using iOS device)

The Wireless Smart Glucose Meter stores up to 500 of your

most recent blood glucose test results along with their

respective dates and times.

Reviewing Test Results

1. Press and release "Memory Button" on the meter.

Press the Memory Button to view the test results stored in

the meter. The ﬁrst reading you'll see is your most recent

blood glucose result.

Note: When the meter memory is full, the oldest test result

will be deleted automatically, and the newest test result will

be saved.

2. Exit the Memory Mode

When you reach the last test result, the word "End" will

appear, and the meter will turn off automatically.

If you do not operate the meter in 30 seconds, it will turn off

automatically.

mg/dL