High Lifter MCFFA-C1D Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Mobil High Lifter MCFFA-C1D. High Lifter MCFFA-C1D 9 halaman. Max clearance can-am defender front forward arched control arm kit

Installation Instructions:
1. Place jack under center of RUV front end and lift until front wheels clear the ground. Be careful to
support the RUV properly so that it is securely supported but so that control arms and shocks can droop
to full extension.
2. Remove front wheels and the calipers from the hub.
3. Remove the lower control arms first. Disconnect from the frame, shock, and hub assembly. NOTE:
You do not need to remove the tie rod
4. Next you will need to remove upper arm, but the brake line is riveted to the upper arm. Disconnect it
from the frame and hub, then turn it over to expose the rivets that secure the brake lines.
5. Use a small drill bit that fits into the head of the rivet and drill out the rivets. Take care not to damage
the brake line.
3