High Lifter MCFFA-C1D 매뉴얼 - 페이지 3

{카테고리_이름} High Lifter MCFFA-C1D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter MCFFA-C1D 9 페이지. Max clearance can-am defender front forward arched control arm kit

페이지 인쇄

Installation Instructions:

1. Place jack under center of RUV front end and lift until front wheels clear the ground. Be careful to

support the RUV properly so that it is securely supported but so that control arms and shocks can droop

to full extension.

2. Remove front wheels and the calipers from the hub.

3. Remove the lower control arms first. Disconnect from the frame, shock, and hub assembly. NOTE:

You do not need to remove the tie rod

4. Next you will need to remove upper arm, but the brake line is riveted to the upper arm. Disconnect it

from the frame and hub, then turn it over to expose the rivets that secure the brake lines.

5. Use a small drill bit that fits into the head of the rivet and drill out the rivets. Take care not to damage

the brake line.