High Lifter MCFFA-C1D 매뉴얼 - 페이지 5

{카테고리_이름} High Lifter MCFFA-C1D에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. High Lifter MCFFA-C1D 9 페이지. Max clearance can-am defender front forward arched control arm kit

페이지 인쇄

8. Now reinstall the ball joints into the new arms.

NOTE: A press or a vise is suggested for removing and replacing the ball joints. If you press in

the ball joint crooked, DO NOT TRY TO FORCE IT IN! If you try to force it straight you can

"egg" the opening. Press the ball joint out and reinsert it into the opening, pressing it in with a

vise. Verify that the clip snaps into place after installing the ball joints into the new Control Arm.

You should always double check the ball joint snap ring for proper fit. Even if you use snap ring

pliers, it may not seat. You can use a flathead screwdriver and a hammer to tap the snap ring to

ensure that it is seated into the grove.

9. Now reinstall the bushings, sleeves, and new grease fittings into the new arms. If you place some grease

on them it makes the installations easier.