High Lifter MCFFA-C1D Podręcznik - Strona 5
Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria samochodowe High Lifter MCFFA-C1D. High Lifter MCFFA-C1D 9 stron. Max clearance can-am defender front forward arched control arm kit
Drukuj stronę8. Now reinstall the ball joints into the new arms.
NOTE: A press or a vise is suggested for removing and replacing the ball joints. If you press in
the ball joint crooked, DO NOT TRY TO FORCE IT IN! If you try to force it straight you can
"egg" the opening. Press the ball joint out and reinsert it into the opening, pressing it in with a
vise. Verify that the clip snaps into place after installing the ball joints into the new Control Arm.
You should always double check the ball joint snap ring for proper fit. Even if you use snap ring
pliers, it may not seat. You can use a flathead screwdriver and a hammer to tap the snap ring to
ensure that it is seated into the grove.
9. Now reinstall the bushings, sleeves, and new grease fittings into the new arms. If you place some grease
on them it makes the installations easier.
5