Autool CT400 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Autool CT400. Autool CT400 14 halaman. Injector cleaner & tester

● Pressure increase adjustment button.

● Text description of function menu.

How to use the drain button

When performing work items 8, 9, and 10, press the button to close the drain

valve. Then the oil injected by the fuel injectors is closed in the glass tube, so as

to compare the amount of oil injected by each fuel injector. After the observation,

open the oil drain valve and return the test liquid to the oil tank.

Operation Procedures

Injector Cleaner takes advantage of the penetrability and cavitation impact

wave caused by ultrasonic waves traveling through the middle to provide

powerful cleaning on objects with complex shapes, cavities, and pores so that the

stubborn carbon deposits can be removed from the injectors.

Preparation:

● Remove the injector from the vehicle engine to check the rubber seals inside

for damage. Replace the damaged rubber seals with another same type of

rubber seal to avoid leakage during testing. Put the outside of injectors in

gasoline or detergent, and wipe them with a soft cloth after cleaning the outside

oil sludge carefully.

● Turn on the power (Note: There will be a delay of several seconds when this

device is restarted after a long power disconnection).

● Take out the cleaning bracket from the accessory box, then put it into the

ultrasonic bath, and put the clean fuel injector in the positioning hole of the

cleaning bracket in the ultrasonic bath.

3.1.2 Operation steps

Ultrasonic Cleaning:

● Add appropriate injector cleaning liquid into the ultrasonic bath, which

slightly immerses over the cleaning bracket will be fine.

● Turn on the ultrasonic switch on the right side of the main unit to start

ultrasonic cleaning.

● During the ultrasonic cleaning process, pulse signals can be input to the fuel

injector.

Steps:

● Plug the injector pulse signal wires into injectors respectively in turn. (Special

injectors need to be connected with adapter wires).

● Press the item selection up and down keys to select the "01 Ultrasonic

Cleaning" item, and then press the working time up and down keys to set the