9dot LiteSync Manual - Halaman 5
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Laboratorium 9dot LiteSync. 9dot LiteSync 17 halaman.
Halaman Cetak
General description
LiteSync is designed to supply power to devices on standard Power over Ethernet (PoE).
It is equipped with 2 integrated Gigabit Ethernet ports and can acquire the synchronization pulse via integrated GPS and Sync
Input port.
1
1
LED INDICATORS
On the front there is a group of 3 LED that indicates the status of the unit and the synchronization presence.
2
POE PORTS
It has 2 pairs of ports: injectors to power and synchronize devices in the lower part, connectors to connect the LAN network
in the upper part. Each single door has its own status LED.
3
SLOT GIGAKEY
On the front of the unit there are slots for inserting the GigaKey keys that allow you to select the output pin of the PoE port
without the use of microswitches in order to provide PoE to a wide range of devices.
POWER CONNECTOR
4
LiteSync can be powered redundantly via two connectors. Each connector has its own power supply LED indicator. On the
back is the grounding terminal.
5
SYNC INPUT PORT
The Sync input port allows you to acquire the synchronization pulse from an external source through the RJ12 connector. You
can select the sync source (AUX: Sync input; GPS: GPS Antenna) through the source selector.
6
ANTENNA CONNECTOR
An external GPS antenna can be connected to this connector which will be used to generate synchronous pulses.
LITESYNC MANUAL
2
3
Figure 1 - LiteSync unit
5
6
4
5
VER. 2 REV. 0