9dot LiteSync Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Laboratorium 9dot LiteSync. 9dot LiteSync 17 halaman.

LiteSync features

The LiteSync unit is ready to be installed. Just insert the GigaKey, connect the GPS antenna (if synchronization is required) and

power the device.

LiteSync can insert into the PoE ports the sync pulse used by Cambium Networks devices to sync the transmission.

Each port can be configured to handle a different type of injection map, with or without sync pulse. The configuration of the

power supply pinout is simple and does not require any IT skills: just insert the specific electronic GigaKey and the port is

configured.

LiteSync is a standard PoE injector capable to power any device in a range from 24V to 56V.

To offer increasingly heterogeneous and compatible solutions, we have also certified our product with the main vendors in

the TLC world, such as Cambium Networks, Ceragon and Intracom Telecom, who have tested their solutions both in the

laboratory and in the field.

Multiple and redundant temporization source

LiteSync has a built-in GPS receiver and can acts as master or slave with other units such us GigaSync or CMM5 (of Cambium

Networks) through the Sync Input port.

Up to 3A (145W@48V) per port.

Connected devices are protected against short circuits, electrostatic surges and electric shocks. The combination of different

types of arresters maximizes efficiency and reduces the action time.

Galvanic isolation protects circuits and people from overvoltage between the input side and the output side. This results in

the best protection for your devices and for you.

LiteSync is 1U tall, can be installed in a rack using the half unit flange or paired with another LiteSync.

LITESYNC MANUAL

VER. 2 REV. 0