Dynasound DS1404 Manual - Halaman 6
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman Dynasound DS1404. Dynasound DS1404 18 halaman. 4-ch. pc programmable soundmasking level controller
Halaman CetakEstablishing Communications with the DS1404
The DS1404 is factory configured to provide a standard Monday through Friday attenuation schedule without need
for further configuration. See the section on "Specifications" for details of the provided schedule.
To create a custom attenuation schedule you must connect the DS1404 to your PC using the provided cable. The
following steps describe connecting your PC to the DS1404 and using the provided software to create custom
soundmasking schedules.
Start the DS1404 control software. After installing the software there will be a Dynasound section in your programs
menu. Click the Start button, go to the "All Programs" list and navigate to the Dynasound menu. Select DS1404
and click to start the program.
When the program starts, use the menu to select "Settings > Communications". the screen should appear as
below. You must select the correct com port based on your PC. The PC and DS1404 cannot communicate if the
correct port is not chosen.
communication settings window
If you are not sure which port is used on your computer you may need to check Windows device manager or your
USB adaptor software to determine the correct port setting.
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071
800.989.6275