Dynasound DS1404 Manual - Halaman 7
Jelajahi secara online atau unduh pdf Manual untuk Peralatan Perekaman Dynasound DS1404. Dynasound DS1404 18 halaman. 4-ch. pc programmable soundmasking level controller
Halaman CetakCreating Attenuation Schedules
After selecting the correct port settings, use the main menu to select " File > Connect". The screen shown below
should appear.
main configuration window - channel one shown
Communications from the DS1404 to the PC are shown near the bottom of this window labeled "Controller Response".
When this window appears, it is important to observe the controller response to see if a connection has been made.
Each time this window is opened the PC based control software attempts to communicate with the DS1404. If, after
a few seconds, the controller response still shows off-line status then close and reopen the window to initate another
connection attempt.
It is important to understand that when creating soundmasking schedules, that you are programming the amount of
attenuation that will be introduced by the DS1404, not the actual final volume levels of the sound system. In other
words, a setting of 15 would produce the most attenuation of the system (the least volume); a setting of 0 would
introduce no attenuation (the most volume).
The DS1404 can be configured to provide from 0dB to 15 dB attenuation per channel and stores an attenuation value
for each minute of the week. Weekly attenuation schedules are easily created with just a few clicks by using the
"Create Weekly Schedule" feature of the control software.
Dynasound, Inc. 6439 Atlantic Blvd. Norcross, GA. 30071
800.989.6275