High Tech Gio-Bella HTH 888 Manual - Halaman 8

Jelajahi secara online atau unduh pdf Manual untuk Sistem Penyaringan Air High Tech Gio-Bella HTH 888. High Tech Gio-Bella HTH 888 16 halaman. Point of use residential water alkalizer for drinking and cooking

Halaman Cetak

Allow water to run for several minutes. You may notice

•

that the water has a black tint, which is nothing more than

carbon particles washing out of the filter. This will

disappear after several seconds. After this initial system

flush, the Gio-Bella will be able to produce drinking water

instantly.

Push in diverter button so that water, once again, exits

•

from the faucet, instead of the Gio-Bella. With the water

flow stopped, the Gio-Bella will automatically turn off.

5. pH Level Selection – Included with your Gio-Bella is a liquid test

kit for measuring pH. The importance of measuring the pH is so

that you know which of the 4 pH selections is the best one for

you and your family. Not every water source is going to yield

the same pH for each setting. The reason for this is that the

mineral content will vary from region to region, or even from

one town to the next. This is why pH measurement is so

important. You certainly would not want to consume water with

a pH that was either too alkaline, or acidic. Ideally, you should

use the selection that will give you between an 8 and 9 pH for

drinking water. To measure the pH, obtain a clear test tube or

juice glass and perform the following:

With water running through the Gio-

•

Bella, experiment with the "Alkaline"

button. Note that each time it is

depressed, the next higher alkaline

level is reached, until the level #4,

after which, the lowest, or weakest

alkaline level is activated. Select the

lowest pH setting. Wait a couple

seconds, and then get a very small

sample (1-2 ounces) in the test tube

or glass.

Unscrew cap from small dropper bottle

•

of test solution and carefully add just 2

User Panel