High Tech Gio-Bella HTH 888 Руководство - Страница 8
Просмотреть онлайн или скачать pdf Руководство для Системы фильтрации воды High Tech Gio-Bella HTH 888. High Tech Gio-Bella HTH 888 16 страниц. Point of use residential water alkalizer for drinking and cooking
Печатать страницуAllow water to run for several minutes. You may notice
•
that the water has a black tint, which is nothing more than
carbon particles washing out of the filter. This will
disappear after several seconds. After this initial system
flush, the Gio-Bella will be able to produce drinking water
instantly.
Push in diverter button so that water, once again, exits
•
from the faucet, instead of the Gio-Bella. With the water
flow stopped, the Gio-Bella will automatically turn off.
5. pH Level Selection – Included with your Gio-Bella is a liquid test
kit for measuring pH. The importance of measuring the pH is so
that you know which of the 4 pH selections is the best one for
you and your family. Not every water source is going to yield
the same pH for each setting. The reason for this is that the
mineral content will vary from region to region, or even from
one town to the next. This is why pH measurement is so
important. You certainly would not want to consume water with
a pH that was either too alkaline, or acidic. Ideally, you should
use the selection that will give you between an 8 and 9 pH for
drinking water. To measure the pH, obtain a clear test tube or
juice glass and perform the following:
With water running through the Gio-
•
Bella, experiment with the "Alkaline"
button. Note that each time it is
depressed, the next higher alkaline
level is reached, until the level #4,
after which, the lowest, or weakest
alkaline level is activated. Select the
lowest pH setting. Wait a couple
seconds, and then get a very small
sample (1-2 ounces) in the test tube
or glass.
Unscrew cap from small dropper bottle
•
of test solution and carefully add just 2
8
User Panel