Gallagher T10 Catatan Instalasi

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Pembaca Kartu Gallagher T10. Gallagher T10 11 halaman. Reader
Juga untuk Gallagher T10: Catatan Instalasi (12 halaman), Catatan Instalasi (12 halaman)

Halaman Cetak
Gallagher T10 Catatan Instalasi
This equipment contains components that can be damaged by
electrostatic discharge. Ensure both you and the equipment are
earthed before beginning any servicing.
The Gallagher T10 Mifare Reader
The Gallagher T10 Mifare reader is a smart card proximity reader. It can
be installed as either an entry reader or exit reader.
The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic
cards.
The reader sends information to the Cardax FT Controller and acts upon
information sent from the Cardax FT Controller. The reader itself does not
make any access decisions.
The Gallagher T10 Mifare reader uses the "Cardax IV Reader"
communications protocol to communicate with the Cardax FT Controller.
Gallagher T10 Mifare Reader
Installation Note | Gallagher T10 Mifare Reader
Installation Note
Part Number: 3E2453 R1 | 1