Gallagher T10 설치 참고 사항

{카테고리_이름} Gallagher T10에 대한 설치 참고 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Gallagher T10 11 페이지. Reader
Gallagher T10에 대해서도 마찬가지입니다: 설치 참고 사항 (12 페이지), 설치 참고 사항 (12 페이지)

페이지 인쇄
Gallagher T10 설치 참고 사항
This equipment contains components that can be damaged by
electrostatic discharge. Ensure both you and the equipment are
earthed before beginning any servicing.
The Gallagher T10 Mifare Reader
The Gallagher T10 Mifare reader is a smart card proximity reader. It can
be installed as either an entry reader or exit reader.
The reader can read Mifare DESFire EV1, Mifare Plus and Mifare Classic
cards.
The reader sends information to the Cardax FT Controller and acts upon
information sent from the Cardax FT Controller. The reader itself does not
make any access decisions.
The Gallagher T10 Mifare reader uses the "Cardax IV Reader"
communications protocol to communicate with the Cardax FT Controller.
Gallagher T10 Mifare Reader
Installation Note | Gallagher T10 Mifare Reader
Installation Note
Part Number: 3E2453 R1 | 1