AFINIBOT A1 Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer 3D AFINIBOT A1. AFINIBOT A1 19 halaman.

Step 2 Assemble idler_end

 Put fouaaaaar M3*14mm inner

hexagon screws and M3 cushion

rings into the idler_end , lock

with M3 nuts but do not

tighten ,as picture.

 Put a limit switch on the

idler_end, locking with two black

M2.5*10mm self_tapping screws.

 Install Ball bearing , Use 1pcs

M5*25mm inner hexagon

screw ,2pcs M5 Cushion ring ,

3pcs M5 small cushion ring and

1pcs M5 nut.

 Another 2pcs idler_ends are the

same assembly .

M5 small

cushion ring*3

M5*25mm inner

hexagon screw

M5 cushion ring*2

M3*14mm inner

hexagon screws

M3 cushion rings

Ball bearing

M2.5*10mm

Limit switch

self_tapping screws*2

Idler_end

M5 nut