Highlite International Showtec LED Powerbar 24 Panduan Produk - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Produk untuk Peralatan Pencahayaan Highlite International Showtec LED Powerbar 24. Highlite International Showtec LED Powerbar 24 13 halaman.
Halaman CetakDMX Operation
Press the Up/Down button to change the DMX address setting rnenu:
The DMX Channel functions when using the entire device as one:
Channel 1:
Red (0-255)
Channel 2:
Green (0-255)
Channel 3:
Blue (0-255)
The LED Powerbar's built-in controller will automatically detect the presence of a DMX signal.
In order to receive a DMX signal, the built-in controller must be attached to a DMX controller by a 3-pin DMX
cable and the DMX controller must be turned on.
To mix RGB color use channels 1, 2, 3.
Note: When there is no DMX signal, the LED Powerbar will switch to Stand-alone Mode after a few
seconds.
DMX Addressing
Unit address
1
2
3
4
5
6
7
8
9
.
.
Etc.
DMX address
1
4
7
10
13
16
19
22
25
.
.
.
6